To order your own Glide-arium™, please visit our Glide-arium™ Page.
|Step 1: Layout all pieces||Step 2: Assemble bottom using |
(4) 3-way connectors.
|Step 3: Insert vertical sides|
|Step 4: Insert wheel mount (optional)|
If no wheel mount, skip to Step 6.
|Step 5: Insert add'l vertical sides|
if wheel mount was ordered.
|Step 6: Insert 4 horizontal bars|
using (4) 4-way connectors.
|Step 7: Insert (4) short vertical poles |
for a 175, or (4) long poles for a 260.
Step 8: Insert (4) 3-way connectors
| View of the completed frame.|
These photos apply for the assembly of a 100, 175, or a 260-gallon Glide-arium™. A 65-gallon will only use steps 1 , 2, 3, and 8. Individual poles will be different lengths based on the size ordered. All poles will be marked with letters to coordinate with the drawing included with your frame. Steps 4 and 5 apply to any size when a wheel mount is ordered.
Your frame was tested to ensure a quality fit to your Glide-arium™ prior to shipping. A rubber mallet was used to obtain a snug fit between the pipe and the connectors. DO NOT force the mesh onto the frame. Doing so will result in ripped seams as this material does not stretch or give at all. If the mesh does not go onto the frame, the frame was not assembled properly.
For a diagram assembly instructions based on size ordered, please click on the appropriate link:
Glider Nursery is not responsible for tears occurring from improper assembly, or modification of the frame.